Currently Shopping by:
Shopping Options
Reducer bushings like our schedule 80 CPVC bushings are used to make the end of a fitting smaller. Reducer bushings fit inside one end of a fitting using a spigot or male threaded end. The bushing is sized to fit a different size pipe inside of it in either a slip/socket style or female threaded end. Many times contractors will use a bushing if manufacturers don’t make a reducing fitting in the size they need. Even manufacturers use this method to fabricate reducing fittings of certain sizes.
1-1/2 inch x 3/4 inch Schedule 80 CPVC Bushing 9837-210
1-1/2 inch x 1-1/4 inch Schedule 80 CPVC Bushing 9838-212
1-1/2 inch x 3/4 inch Schedule 80 CPVC Bushing 9838-210
1-1/2 inch x 1-1/4 inch Schedule 80 CPVC Bushing 9839-212
1-1/2 inch x 1/2 inch Schedule 80 CPVC Bushing 9837-209
1-1/2 inch x 3/4 inch Schedule 80 CPVC Bushing 9839-210
Our Sch 80 CPVC bushings are flush style – meaning they are designed to take up as little space as possible in the pipe line. The idea is to have the bushing line up “flush” with the end of the fitting it is reducing (bushings do add additional length to the joint).
CPVC bushings come in a range of sizes. The larger size (indicated in the name) is the size of the fitting you need to reduce. The smaller size is the size you need to reduce down to. As with any reductions in pipe size, be sure you take into account how your media will flow and the affects on pressure a reduction in pipe size will cause.