There are two types of piping system loadings, overhead (Type 1) and vertical (Type 2) as described below. All Champion Strut pipe straps and clamps show the recommended loading for both types of loading.
The design load shown represents pipes supported below the strut. The design loads shown are based on a minimum ultimate failure safety factor of 3:1
The design loading can be achieved with the addition of a vertical stop lock assembly (Part #200-4219) installed directly beneath the pipe clamp. The adjacent illustration shows how the vertical stop lock assembly provides additional support for pipe and how it can be used to achieve full Type 2 design loads. Design loads are based on a minimum clamp slip safety factor or 3:1. It is recommended that stop lock assemblies be used for all vertical pipe support applications.
3" Power-Utility Products Stainless Steel Strut Clamp
3/4" Riser Clamp designed for use with standard iron pipe!
3/4" Riser Clamp with copper-colored epoxy finish!
3/4" Power-Utility Products Stainless Steel Strut Clamp
4" Power-Utility Products Stainless Steel Strut Clamp
4" Riser Clamp designed for use with standard iron pipe!
5" Power-Utility Products Stainless Steel Strut Clamp
6" Power-Utility Products Stainless Steel Strut Clamp
Are you ready to buy or need assistance selecting the correct products? If so, speak with one of our experienced product specialists by calling (866) 777-8001 or complete our easy to use Price Quote Form!