NeoLogic is one of the top filtration companies in the industry, with a wide range of products for any and every filtration need. Here at Commercial Industrial Supply, we carry NeoLogic's entire Neo-Pure line, which contains cartridge and bag filtration equipment. On this page, view our entire selection of Neo-Pure filter cartridges and bags, many of which are rated for use in food and beverage applications. For more information on any of these cartridges or bags, click the "Spec Sheet" link or contact us. Our knowledgeable staff would be happy to answer any questions you may have!
Neo-Pure PSJ Series Pleated Synthetic Jumbo High Flow Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
0.2A, 0.35, 1A, 1, 5, 10, 20, 50, 100 and 150 microns |
9-5/8”, 19 1/2”, and 30 3/4” | 7-3/4" | ||
Max Operating Temperature | Materials of Construction | |||
160°F (71.1°C) | Filter Media: Pleated polypropylene melt blown; Core: Polypropylene; End Caps: Polypropylene; End Seal: Grommet - Buna N: O-Ring: Buna N or EDPM |
|||
Neo-Pure MBJ Series Melt Blown Jumbo Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
1, 5, 20, 50, and 100 microns | 9-5/8”, 19 1/2”, and 30 3/4” | 7-3/4” | ||
Operating Temperature | Materials of Construction | |||
40°F – 140°F (4.4°C – 60°C) | Filter Media: Polypropylene melt blown; Core: Polypropylene; End Caps: Polypropylene |
|||
Neo-Pure PSJ Series High Temperature Pleated Synthetic Jumbo Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
1, 5, 10, 20, 50, 100 and 150 microns | 9-5/8”, 19 1/2”, and 30 3/4" | 7-3/4” | ||
Max Operating Temperature | Materials of Construction | |||
200°F (93.3°C) | Filter Media: Pleated polypropylene melt blown; Core: Stainless Steel |
Neo-Pure PS Series Standard Efficiency Pleated Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
0.35, 1, 1A, 5, 10, 20, 30, 50, and 100 microns | 9-3/4”, 20”, 30”, and 40” | 2-3/4” and 4-1/2” | ||
Operating Temperature | Materials of Construction | |||
40°F – 180°F (4.4°C – 82.2°C) |
Filter Media: Pleated Polyester; Core: Polypropylene |
|||
Neo-Pure PH Series High Efficiency Pleated Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.2A, 0.35, 1, 1A, 5, 10, 20, 30, 50, and 100 microns | 9-3/4”, 19-1/2”, 20”, 29-1/4”, 30”, 39”, and 40” |
1-1/16” ID, 2-3/4” and 4-1/2” OD |
||
Max Operating Temperature | Materials of Construction | |||
175°F (79.4°C) | Filter Media: 100% polypropylene melt blown; Core: Polypropylene; End Caps: Vinyl Plastisol |
Neo-Pure WS Series Wound Depth Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
1, 5, 10, 20, 30 and 50 microns | 10", 20", 30" and 40" | 2-1/2" and 4-1/2" | ||
Operating Temperature | Materials of Construction | |||
40°F – 175°F (4.4°C – 79.4°C) | Filter Media: FDA polypropylene fibers; Core: Polypropylene | |||
Neo-Pure W Series Wound Depth Cartridges - Premium Series | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
1, 5, 20, 30, 50 and 100 microns | 9-7/8”, 20”, 30”, and 40” | 1” ID, 2-1/2” and 4-1/2” OD | ||
Max Operating Temperature | Materials of Construction | |||
180°F (82°C) | Filter Media: FDA Polypropylene; Core: Polypropylene |
Neo-Pure MB Series Melt Blown Sediment Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
1, 5, 20, 25, 50 microns | 9-7/8”, 20”, 30”, and 40” | 2-1/2” and 4-1/2” | ||
Operating Temperature | Materials of Construction | |||
40°F – 175°F (4.4°C – 79.4°C) | Filter Media: 100% Polypropylene | |||
Neo-Pure HMB Series High Efficiency Melt Blown Sediment Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
0.5, 1, 3, 5, 10, 20, 25, 30, 50, 75, and 100 microns |
9-7/8”, 20”, 30”, and 40” | 2-1/2” and 4-1/2” | ||
Operating Temperature | Materials of Construction | |||
40°F – 175°F (4.4°C – 79.4°C) | Filter Media: 100% Polypropylene |
Neo-Pure NP-RFG10BB Radial Flow Filter Cartridge | ||||
Nominal Micron Sizes | Dimensions | Operating Pressure | ||
25 microns | 4-1/2” dia. x 10” | 30 to 100 psi | ||
Operating Temperature | Filter Media | |||
40 to 100°F (4.4 to 37.8°C) | Coconut shell granular activated carbon (GAC) | |||
Neo-Pure NP-RFG20BB Radial Flow Filter Cartridge | ||||
Nominal Micron Sizes | Dimensions | Operating Pressure | ||
25 microns | 4-1/2” dia. x 10” | 30 to 100 psi | ||
Operating Temperature | Filter Media | |||
40 to 100°F (4.4 to 37.8°C) | Coconut shell granular activated carbon (GAC) | |||
Neo-Pure CT Series Carbon Block Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
0.5, 1, and 5 | 9-7/8” and 20” | 2-1/2” and 4-1/2” | ||
Operating Temperature | Materials of Construction | |||
35°F – 100°F (2°C – 38°C) | Outer Layer and Netting: polypropylene; Filter Media: Activated coconut shell carbon |
Neo-Pure HP-PP Series Polypropylene Filter Cartridges |
||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.2, 0.45, 1, 3, 5, 10, 20, 30, 40, and 50 |
9-3/4” (24.7 cm), 19-3/4” (50.17 cm), 20” (50.8 cm), 29-1/4” (74.3 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: polypropylene; Outer cage, inner core and end caps: polypropylene |
|||
Neo-Pure HP-MG Series Microglass Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.2, 0.45, 1, 3, 10, and 30 | 9-3/4”, 10”, 20”, 30”, and 40” | 1.0” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: borosilicate microglass; Support layer: polyester; Cage and end caps: polypropylene |
|||
Neo-Pure HP-PESE Series Polyethersulfone Filter Cartridges - Electronic Grade | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.03, 0.1, 0.2, 0.45, and 0.65 | 9-3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: asymmetric polyethersulfone; Outer cage, inner core and end caps: polypropylene |
|||
Neo-Pure HP-PESG Series Polyethersulfone Membrane Filter Cartridges - General Grade | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.03, 0.1, 0.2, 0.45, 0.65, 0.8, 1.0, 1.2 micron |
9-3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: Asymmetric polyethersulfone; Outer cage, inner core and end caps: Polypropylene |
|||
Neo-Pure HP-PESW Series Polyethersulfone Filter Cartridges - Water Grade | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.03, 0.1, 0.2, 0.45, 0.65, and 1 |
9-3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: asymmetric polyethersulfone; Outer cage, inner core and end caps: polypropylene |
|||
Neo-Pure HP-PESB Series Polyethersulfone Membrane Filter Cartridges - Beverage Grade | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.1, 0.2, 0.45, 0.65, 0.8, 1, 1.2 |
9 3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: polyethersulfone; Outer cage, inner core and end caps: polypropylene |
|||
Neo-Pure HP-PSV Series Polysulfone Filter Cartridges - Vent Grade | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.2 | 9-3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: hydrophobic polysulfone; Outer cage, inner core and end caps: polypropylene |
|||
Neo-Pure HP-NY Series Nylon 66 Membrane Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.1, 0.2, 0.45, and 0.65 | 9 3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: Nylon 66; Outer cage, inner core and end caps: polypropylene | |||
Neo-Pure HP-PTFE Series PTFE Membrane Filter Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | ID and OD | ||
0.1, 0.2, 0.45, 1 | 9-3/4” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), and 40” (101.6 cm) |
1” (2.54 cm) ID, 2.67” (6.78 cm) OD |
||
Max Operating Temperature | Materials of Construction | |||
176°F (80°C) | Filter media: PTFE; Outer cage, inner core and end caps: polypropylene |
Neo-Pure FB Series Filter Bags | ||||
Nominal Micron Sizes | Bag Sizes | |||
1, 5, 10, 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 400, 600, 800, and 1000 |
#1 – 7” diameter x 16-1/2” length #2 – 7” diameter x 32” length |
|||
Ring Materials | Bag Materials | |||
Various | Various | |||
Neo-Pure HDFB Series High Density Filter Bags | ||||
Nominal Micron Sizes | Bag Sizes | |||
1, 5, 10, 25, 50, 75, 100, and 200 |
#2 – 7-1/16” diameter x 32” length | |||
Ring Materials | Bag Materials | |||
Polypropylene, Stainless Steel, or Steel |
Polypropylene Felt |
Neo-Pure HF Series High Flow Cartridges | ||||
Nominal Micron Sizes | Cartridge Lengths | Outside Diameter | ||
1, 3, 5, 10, 20, 40, 50, and 100 |
20", 40", 60", and 80" |
6-1/4" | ||
Max Operating Temperature | Materials of Construction | |||
160°F (71.1°C) - polypropylene 200°F (93°C) - microfiberglass |
Filter media: Polypropylene or Microfiberglass; O-Rings/Gaskets: Buna-N, EPDM, Silicone, or Viton |
Neo-Pure filter cartridges are split into eight categories: jumbo, pleated, wound depth, carbon, high purity, bags, and high flow. Jumbo filter cartridges are are made for applications which need larger filtration capacities. Pleated filter cartridges have extra surface area for extended filter life in a smaller filter. Wound depth cartridges have precision winding patterns and tension control for maximum dirt-holding capacity. Carbon filter cartridges use organic matter in the filter media for a more eco-friendly product. High purity filter cartridges provide filtration precise enough for food and beverage applications. Filter bags are a simpler and less expensive filtration method. High Flow filter cartridges give the user a longer filter life and lower pressure drop in high flow environments.
For pricing information, call us at (866) 777-8001 or fill out our online quote request form.