Request A Quote

Get a product quote and lead time fast!

Get a Quote

Melt Blown Cartridges

(0 products)

Melt blown cartridges are one of many filter cartridge varieties that Commercial Industrial Supply offers. These filters fiber-free melt-bonded media, so there is no fluid contamination in the system. These filter cartridges are extremely customizable, as they are available in many different variations of gasket type, cartridge length, diameter, and more! For more information and pricing on any of our melt blown filter cartridges, call us at (866) 777-8001!

Eaton Melt Blown Cartridges

LOFTOP Melt Blown Polypropylene Filter Cartridges

Filter Material Gaskets/O-Rings End Caps
Polypropylene Silicone (standard)
(other materials available)		 Polypropylene
Max Temperature Max Differential
Pressure		 Inner / Outer
Diameter
176F (80C) 58psi @ 77F 1.1" (2.7cm) /
2.5" (6.4cm)
 Retention Ratings Nominal Lengths Spec Sheet
0.5 - 120 μm @
99.98% efficiency		 9.75" - 40" (12.7cm - 127cm) Request a Quote
LOFTOP Coreless Melt Blown Filter Cartridges

Filter Material Gaskets/O-Rings Dirt Holding
Capacity
Polypropylene
or Nylon 6.6		 Not Specified 700 - 3500 g
Max Temperature Max Differential
Pressures		 Inner / Outer
Diameter
Polypropylene: 176F (80C)
Nylon 6.6: 266F (130C)		 Polypropylene: 58psi @ 77F
14.5psi @ 176F
Nylon 6.6: 58psi @ 90F
14.5psi @ 266F		 4.5" (11.4cm) /
6" (15.2cm)
 Retention Ratings Nominal Lengths Spec Sheet
1 - 120 μm @
99.98% efficiency 		20" or 40"
(50.8cm or 101.6cm)		 Request a Quote
LOFTOP Melt Blown Nylon Filter Cartridges

Filter Material Gaskets/O-Rings End Caps
Polyamide 6.6 Silicone (standard)
(other materials available)		 Polyamide 6.6
Max Temperature Max Differential
Pressures		 Inner / Outer
Diameter
302F (150C) 89.9psi @ 86F, 79.8psi @ 158F,
69.6psi @ 212F, 49.3psi @ 302F 		1.1" (2.7cm) /
2.5" (6.4cm)
 Retention Ratings Nominal Lengths Spec Sheet
0.5 - 120 μm @
99.98% efficiency 		9.75" - 40" (12.7cm - 127cm) Request a Quote
LOFTREX Industrial Melt Blown Polypropylene Filter Cartridges

Filter Material Gaskets/O-Rings End Caps
Polypropylene Not Specified Not Specified
Max Temperature Max Differential
Pressures		 Inner / Outer
Diameter
149F (65C) 36.3psi @ 77F 1.1" (2.7cm) /
2.5" (6.4cm)
 Retention Ratings Nominal Lengths Spec Sheet
1 - 90 μm @
80% efficiency		 9.75" - 50" (12.7cm - 127cm) Request a Quote
LOFTREX M Melt Blown Polypropylene Filter Cartridges

Filter Material Gaskets/O-Rings End Caps
Polypropylene Silicone (standard)
(other materials available) 		Polypropylene 
Max Temperature Max Differential
Pressures		 Inner / Outer
Diameter
149F (65C) 58psi @ 77F 1.1" (2.7cm) /
2.5" (6.4cm)
 Retention Ratings Nominal Lengths Spec Sheet
1 - 150 μm @
95% efficiency 		9.75" - 40" (12.7cm - 101.6cm) Request a Quote

 

NeoLogic Melt Blown Cartridges

Neo-Pure HMB Series High Efficiency Melt Blown Sediment Cartridges

Filter Material Gaskets/O-Rings Max Temperature
Polypropylene Buna-N Standard
(other materials available)		 175 F (79.4 C)
Certifications Initial Pressure Drop Outside Diameter
NSF/ANSI 61 &
NSF/ANSI 42		 <1psi typical 2-1/2" and 4-1/2"
 Retention Ratings Nominal Lengths Spec Sheet
0.5 - 100 μm 9-7/8" - 40" (25.1cm - 101.6cm) Request a Quote
Neo-Pure MB Series Melt Blown Sediment Cartridges

Filter Material Gaskets/O-Rings Max Temperature
Polypropylene Not Specified 175 F (79.4 C)
Certifications Initial Pressure Drop Outside Diameter
NSF/ANSI 61 &
NSF/ANSI 42 		<1psi typical 2-1/2" and 4-1/2"
 Retention Ratings Nominal Lengths Spec Sheet
1 - 50 μm 9-7/8" - 40" (25.1cm - 101.6cm) Request a Quote
Neo-Pure MBJ Series Melt Blown Jumbo Filter Cartridges

Filter Material Gaskets/O-Rings Max Temperature
Polypropylene Not Specified 140 F (60 C) 
FDA Compliance Max Flow Rates Outside Diameter
CFR Title 21 35 - 95 gpm 7-3/4"
 Retention Ratings Nominal Lengths Spec Sheet
1 - 100 μm 9-5/8" - 30-3/4" (24.2cm - 78.1cm) Request a Quote
Neo-Pure NP420 Grooved Sediment Filter Kit with Siliphos Scale Inhibitor

Filter Material Gasket/O-Ring Max Temperature
Polypropylene,
Siliphos		 Not Specified 145 F (62.8 C)
Certification Max Flow Rate Outside Diameter
NSF/ANSI 42 5 gpm 2-1/2"
 Retention Rating Nominal Lengths Spec Sheet
5 μm 9-7/8" (25.1cm) Request a Quote
Neo-Pure SDG-45 Series 5 Micron Sediment Depth Grooved Cartridges

Filter Material Max Pressure Max Temperature
Polypropylene 125 psi 100 F (37.78 C)
Certification Max Flow Rate Outside Diameter
NSF/ANSI 42 20 - 45 gpm 4-1/2"
 Retention Rating Nominal Lengths Spec Sheet
5 μm 9-7/8" - 20" (25.1cm - 50.8cm) Request a Quote

 

Shelco Filters Melt Blown Cartridges

MicroSentry MB Series Melt Blown Filter Cartridges

Filter Material Gaskets/O-Rings End Caps
Polypropylene Viton Themally-Bonded
Propylene
Max Temperature Max Differential
Pressures		 Outside
Diameters
140F (60C) 20psi (1.4bar) 2.5" or 4.5"
 Retention Ratings Nominal Lengths Spec Sheet
1 - 100 μm 4-7/8" - 40" (12.4cm - 101.6cm) Request a Quote

 

Melt blown filter cartridges provide maximum purity, due to the way they are constructed. The filter media is melt-bonded, so there are no fibers that can fall from it and contaminate the liquid being filtered. They are also able to perform superbly in high temperature applications, with some cartridges having four or five hundred layers of melt-bonded material. Extremely precise micron ratings make these melt blown filter cartridges some of the best available! Request a quote on industrial filtration equipment today!
View as

No products found

Compare /3