Hayward Actuation & Control Equipment
(0 products)
Hayward manufactures everything you need for a efficient flow control system, including actuators. Actuators mount on a valve and operate it themselves. This allows opening, closing, and anything in-between to be scheduled, which means less work for you! Hayward actuators and controllers are easy to operate and will fit on valves from many companies, not just Hayward. Actuators are also great for corrosive environments that aren't safe for people. Check out our selection of electric and pneumatic actuators from Hayward below.
Electric Actuators
| Electric Actuator Series Comparison |
| EAU Series |
- Thermoplastic NEMA 4/4x Enclosure
- 90 or 180 Degree Operation
- Lightweight, Compact, and Inexpensive
- On/Off Service Applications, Unidirectional
- UL/CSA Listed Motor, Permanently Lubricated
- Voltage Options of 12 or 24 VAC, 220VAC, and 12 or 24 VDC
|
| ECP Series |
- 1/4 Turn Operation
- Nema 4/4x Enclosure with GFPP Construction
- Voltage: Single Phase 120/230V and 12/24V
- Thermal Overload Protection
- Ideal for Corrosive Atmospheres and Environments
- For Ball Valves 1/2" - 6" and Butterfly Valves 2" - 6"
|
| HRS Series |
- Powder Coated Aluminum Alloy Housing
- ISO5211 Compliant Mounting with Double Square Drive Socket
- Heavy Duty 1/4 Turn Operation for Ball & Butterfly Valves
- NEMA 4/4X/IP67 Environmental Rating
- On/Off or Proportional Control (2-10 vdc / 4-20mA Inputs & Outputs)
- Backed by Hayward's Exclusive 2 Year Warranty
|
| HZSN1 Series |
- Proportional Models: 4-20mA or 2-10vdc Feedback Output Standard
- ISO 5211 Compliant with 11mm Double Square Female Drive
- Low Profile Visual Position Indicator + 3 Flush-Mounted LEDs
- Manual Override Lever + 8mm Access Shaft at Bottom of Actuator
- NEMA 4X/IP67 Compliant
- PG6 EMT Entry Port with Sealed Cable Gland
|
Pneumatic Actuators
| Pneumatic Actuator Series Comparison |
| PCD Series |
- For Ball and Butterfly Valves Up To 24"
- Four-Piston Rack and Pinion Design
- ISO5211 Mounting Base
- Compact Epoxy-Coated Aluminum Housing
- Position Indicator + Manual Override
- Namur-Style Solenoid Mounting (Inlet/Outlet)
|
| PCS Series |
- For Ball and Butterfly Valves Up To 24"
- Four-Piston Rack and Pinion Design
- Manual Override
- Compact, Lightweight Epoxy-Coated Aluminum Housing
- Adjustable Travel Stops
- ISO5211 Mounting Base
|
| PMD Series |
- Corrosion-Resistant Thermoplastic Housing
- For Ball Valves Up To 4"
- Permanently Lubricated Gear Train
- Manual Override
- Two-Piston Rack and Pinion Design
- ISO5211 Mounting Base
|
| PMD4 Series |
- For Ball Valves (1/2" - 4") and Butterfly Valves (Up To 4")
- Ideal for Corrosive Atmosphere and Environments
- Anodized Aluminum Two-Piston Rack and SS Pinion
- Lightweight -- Easy for Installation
- Alternative Operating Media for 40psi to 120psi
- ISO5211 Mounting Base
|
| PMS Series |
- For Ball Valves Up To 4"
- Corrosion-Resistant Thermoplastic Housing
- Permanently Lubricated Gear Train
- Two-Piston Rack and Pinion Design
- Namur-Style Mounting
- ISO 5211 Mounting Base
|
| PMS4 Series |
- For Ball Valves (1/2" - 4") and Butterfly Valves (Up to 4")
- Corrosion-Resistant GFPP Housing
- Anodized Aluminum Two-Piston Rack and SS Pinion
- Lightweight -- Easy for Installation
- All Units are Marked for Traceability
- ISO5211 Mounting Base
|
Additional Hayward Actuator Information
Hayward's electric and pneumatic actuators are specifically designed to work with Hayward's plastic valves, but could be compatible with others. To figure out if these actuators will work with a non-Hayward valve, check the ISO rating of the mounting apparatus. If they match up, you're in business! You may be wondering, "What's the difference between electric and pneumatic actuators?" Electric actuators use electricity to operate the valve, while pneumatic actuators use pressureized air. Both methods can provide precise actuation, but each has it's own specific strengths.
